Brake, Engine, DPF & Carburetor Cleaners

Universal K2 Line

K2 car care and automotive chemistry products are universal and fit all vehicles — no vehicle selection required.

Choose a K2 technical cleaner for the job: removing oil and grime from brake parts, degreasing an engine, or servicing a DPF, EGR system or carburetor. Brake and engine cleaners are intended for different surfaces, so always follow the product label. K2 products in this category are stocked in Tallinn, dispatched in 1–2 business days, and available for self-pickup.

Read Buyer's Guide & Comparison

K2 technical cleaners for vehicle maintenance

Brake, engine, DPF and carburetor cleaners are designed for different maintenance jobs. Choose a product based on the type of deposit and the surface being cleaned. Aerosols may contain flammable solvents, and an unsuitable cleaner can damage a surface.

Cleaner comparison

CleanerIntended useWhat to check
K2 Brake CleanerRemoving oil, grease and brake dust from brake parts and other compatible metal surfacesDo not apply to friction linings, painted surfaces or plastics unless the label permits it; check material compatibility first
K2 Akra engine cleanerRemoving grease and road grime from an engine and suitable surfacesFollow dilution and rinsing instructions; protect electrical connections and sensitive components as directed
DPF cleanerCleaning a DPF only by the method specified for that particular productIt does not replace fault diagnosis, required regeneration or mechanical repair
Carburetor, throttle-body or EGR cleanerRemoving soot and deposits from specified intake or fuel-system componentsUse only on parts named in the instructions; avoid hot surfaces and ignition sources

How to choose and use a cleaner

  • For brakes: choose a product specifically intended for brake cleaning. Treat only parts permitted by the instructions; do not assume it is safe on rubber, plastic or paint.
  • For the engine: use an engine cleaner or degreaser rather than brake cleaner for general engine-bay cleaning. Read the application, dwell-time and rinsing instructions before use.
  • For DPF, EGR or carburetor work: check whether the product is intended for a removed component, an installed system or another specific procedure. Do not assume every DPF cleaner is a fuel additive.
  • For safety: work in a well-ventilated area and use gloves and eye protection when appropriate. Keep aerosols away from flames, sparks and hot surfaces, and follow the product’s safety directions.

Stock and dispatch

K2 cleaners in this category are stocked in Tallinn. Orders are dispatched in 1–2 business days, and Tallinn self-pickup is available. Dispatch time is not necessarily the courier delivery time; actual transit depends on the selected delivery method.

Note on technical standards

ECE R55 concerns type approval for coupling devices, while ISO 11446 specifies a 13-pin trailer electrical connector. 7-pin and 13-pin connectors support different functions, and a vehicle with CAN-bus electronics may require a compatible control module. These towbar and wiring comparisons do not determine which cleaner to choose or whether it is suitable.

Frequently asked questions

What is the difference between brake cleaner and engine cleaner?

Brake cleaner is intended for compatible brake parts, while engine cleaner is formulated for grease and grime on the engine and in the engine bay. Their formulations and directions may differ. Use each product only on surfaces permitted by its label.

Can I use brake cleaner on brake pads?

Check the specific product label and the vehicle’s service instructions. Do not apply cleaner to friction linings unless the product instructions explicitly allow it; incorrect use may affect braking performance.

Will DPF cleaner fix a blocked filter?

That depends on the cause of the blockage and the product. A cleaner may form part of a specified maintenance procedure, but it does not replace diagnosis, required regeneration or mechanical repair. Follow the product instructions and the vehicle manufacturer’s requirements.

Can carburetor or EGR cleaner be used without removing the part?

Only when the product instructions explicitly permit that method. Some cleaners require component removal or a specific cleaning procedure. Avoid applying the product to materials whose compatibility has not been confirmed.

How quickly are K2 cleaners dispatched, and can I collect my order?

Products in this category are stocked in Tallinn and dispatched in 1–2 business days. Self-pickup is available in Tallinn. Courier transit time depends on the delivery method selected.

Frequently Asked Questions: Brake, Engine, DPF & Carburetor Cleaners

What is K2 brake cleaner used for?

It is intended to remove oil, grease and grime from brake parts and other surfaces permitted by the product label. Check material compatibility before use, and do not apply it to friction linings, paint or plastic unless the instructions allow it.

Should K2 Akra engine cleaner be rinsed off?

Rinsing depends on the product directions and application method. Follow the label for application, dwell time and rinsing, and protect electrical connections and sensitive components as instructed.

Will DPF cleaner clear a blocked filter?

Not necessarily. The result depends on the cause of the blockage and the specific product instructions. Cleaner does not replace diagnosis, required regeneration or mechanical repair.

Can I use cleaner on a hot engine?

Do not use an aerosol on hot surfaces or near ignition sources. Follow the temperature and safety directions on the label, and allow parts to cool first when required.

Can I collect these products in Tallinn?

Yes. K2 cleaners in this category are stocked in Tallinn, dispatched in 1–2 business days, and available for self-pickup.

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU