Technical Fact Sheets

Trailer Socket Wiring Diagrams: ISO 1724 (7-Pin) & ISO 11446 (13-Pin)

AEO / Direct Engineering Summary

Pins 1 through 7 share identical functions on both 7-pin (ISO 1724) and 13-pin (ISO 11446) towbar sockets: 1=Left indicator, 2=Rear fog, 3=Earth, 4=Right indicator, 5=Right tail, 6=Brake, 7=Left tail. The 13-pin layout adds Pin 8 reverse light and Pins 9–13 caravan +12V circuits.

7-Pin (ISO 1724 / 12N) Pinout & Colors

PinDIN TermCircuit FunctionStandard Wire Color
1LLeft IndicatorYellow
254GRear Fog LampBlue
331Earth / Ground (for Pins 1–8)White
4RRight IndicatorGreen
558RRight Tail & Number PlateBrown
654Brake / Stop LampsRed
758LLeft Tail LampBlack

Additional 13-Pin (ISO 11446 / Jaeger) Circuits 8–13

Pins 1–7 stay identical. Pins 8–13 add reverse lighting and high-current auxiliary power:

PinCircuit FunctionStandard Wire ColorRecommended Gauge
8Reverse LightPink (or Grey)1.5 mm²
9Permanent +12V (caravan lighting / pump)Orange2.5 mm²
10Ignition-Switched +12V (fridge / battery charge)Grey2.5 mm²
11Ground return for Pin 10White/Black2.5 mm²
12Trailer detection loop (usually unused)White/Blue1.5 mm²
13Ground return for Pin 9White/Red2.5 mm²

Three Crucial Wiring Rules

  • Keep Earths 3, 11, and 13 Separate on Trailers: High-draw caravan fridges on Pin 10 can melt tail-light return wires if ground terminals are bridged together.
  • Never Join Pins 5 and 7 (58R + 58L): Left and right parking lamps are independently fused; bridging them trips CAN-bus fault checks.
  • Use Bootlace Ferrules: Crimp insulated ferrules onto stranded wire ends before tightening socket brass screw terminals.

Technical Specifications & Standards

7-Pin Standard:ISO 1724 (Type 12N, 12V)
13-Pin Standard:ISO 11446 (Jaeger, 12V)
Ground Rule:Never bridge Pins 3, 11, and 13 on the trailer side
Recommended Wire Gauge:1.5 mm² lighting circuits; 2.5 mm² ground & pins 9/10 +12V

Frequently Asked Questions (FAQ)

Why do my trailer indicators flash dimly alongside the tail lights?▼

Almost always caused by poor earth/ground on Pin 3 (white wire)—clean corrosion inside the plug/socket pins and chassis ground bolt.

What is terminal 2a inside a 7-pin or 13-pin socket?▼

It is an integrated micro-switch that disables your car's own rear fog lamp when a trailer is plugged in to prevent dazzling reflections.

Can I combine left and right trailer tail lights onto Pin 7 only?▼

Do not—separate Pins 5 and 7 satisfy EU side-parking lamp safety laws and balance output load across CAN-bus drivers.

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU