7-pin vs 13-pin: key differences
| Feature | 7-pin (usually ISO 1724) | 13-pin (ISO 11446) |
|---|---|---|
| Number of contacts | 7 | 13 |
| Basic road lights | Yes | Yes |
| Reverse-light circuit | Usually not available | Can be supported by pin 8 |
| Auxiliary power | Limited or unavailable | Pins 9 and 10 can provide power |
| Typical use | Basic trailer | Trailer, motorhome or carrier with extra functions |
| Connector locking | Depends on design | Usually a twist-lock; check the specific product |
Understand the standards
ISO 11446 defines the 13-pin electrical connection. ECE R55 concerns type approval of the towing device, not the connector pin layout. Choosing a wiring kit does not replace checking the towbar and vehicle requirements.
Pins and auxiliary functions
In a 13-pin connection, pins 1–8 are typically used for lighting and earth connections. Pin 8 is for the reverse light. Pin 9 can provide permanent +12 V power, while pin 10 can provide ignition-switched +12 V; the corresponding earth connections are pins 13 and 11. The actual wiring and availability of these functions depend on the kit, installation and vehicle equipment. Do not assume every 13-pin kit activates all auxiliary-power circuits.
CAN-bus and compatibility checks
Many newer vehicles use a CAN-bus network and electronically monitor lighting loads. They may require a dedicated control module compatible with the exact vehicle model. An incompatible connection can cause fault messages, interfere with lamp monitoring or leave some functions unavailable. Before ordering, compare the vehicle make, model, body style and year with the kit’s compatibility information; also check the vehicle and towbar instructions where relevant.
Selection and installation checklist
- Choose 13-pin if you need a reverse light or auxiliary power for the trailer.
- Check that the kit is designed for your vehicle’s electrical system and CAN-bus equipment.
- Confirm whether the kit includes the socket, control module, fixings and installation instructions.
- Have the kit installed according to the vehicle and wiring-kit manufacturers’ instructions, then test every lighting and auxiliary-power circuit.
Delivery
AUTO-HAK and Steinhof 13-pin wiring kits are sent by courier directly from the Poland central warehouse. Delivery takes 3–5 business days. Tallinn stock and self-pickup are not offered for this category.
