7-Pin Electrical Sets

Exact Vehicle Fitment (TecDoc K-type)

Select your vehicle make, model, and engine to view 100% compatible towbars and wiring kits.

Select Vehicle Model →

A 7-pin 12 V wiring kit typically follows the ISO 1724 connection standard and connects a trailer’s basic lighting circuits. Before ordering, check vehicle and socket compatibility and whether the car requires a CAN-bus interface or a separate electronic module. Items in this category are sent by courier from the AUTO-HAK / Steinhof central warehouse in Poland in 3–5 business days; self-pickup is not available.

Read Buyer's Guide & Comparison

7-pin trailer wiring: what does it connect?

A 7-pin 12 V wiring kit connects a trailer’s basic lighting circuits. The commonly used connection standard is ISO 1724. It covers indicators, brake lights, tail lights and a rear fog lamp. Standard 7-pin wiring generally does not provide a reversing light, permanent 12 V supply or the auxiliary circuits used by a caravan.

ISO 1724 pin functions

PinCommon designationFunction
1LLeft indicator
254gRear fog lamp
331Earth / ground
4RRight indicator
558RRight tail light
654Brake light
758LLeft tail light

Wire colours and kit construction can vary by manufacturer and vehicle-specific design. Follow the wiring kit’s instructions rather than relying on wire colour alone.

Technical Buyer's Guide & Recommendations

7-pin or 13-pin: which should you choose?

Feature7-pin, ISO 172413-pin, ISO 11446
Basic lighting: indicators, brake lights and tail lightsYesYes
Rear fog lampYesYes
Reversing-light connectionNot part of the standard 7-pin functionsYes, on a dedicated pin
Auxiliary power and caravan circuitsGenerally not providedDedicated pins are available; operation depends on the installation
Typical useBasic trailer needing standard lightingTrailer or caravan requiring additional functions

Choose the connector to match the trailer’s requirements and the vehicle socket. A 7-to-13-pin adapter does not create electrical circuits or power supplies that are not present in the original installation.

Vehicle compatibility and CAN-bus

On modern vehicles, lighting may be managed through a CAN-bus network and electronic control units. A basic universal connection may therefore be unsuitable. Vehicle-specific wiring or an electronic module is designed to interface the trailer lights with the car’s electrical system, but the correct solution depends on the make, model, year, lamp type and kit instructions.

Before ordering, check:

  • the vehicle’s make, model and year of manufacture;
  • whether the kit is vehicle-specific or universal;
  • whether the vehicle has LED lights, bulb monitoring or CAN-bus, and whether a compatible module is required;
  • whether the vehicle socket and trailer plug are 7-pin or 13-pin;
  • whether you need basic lighting only or also a reversing light and auxiliary power.

Installation, ECE R55 and delivery

Wiring connects the trailer’s electrical circuits; it does not replace the mechanical towbar. ECE R55 concerns mechanical coupling devices and their type approval, not the 7-pin wiring standard. Check that both the towbar and the electrical kit are suitable for your vehicle and intended use. Have installation involving vehicle electronics carried out by a qualified installer.

AUTO-HAK / Steinhof wiring kits in this category are dispatched by courier directly from the central warehouse in Poland in 3–5 business days. Tallinn warehouse stock and self-pickup are not offered for this category.

Frequently Asked Questions: 7-Pin Electrical Sets

What does 7-pin ISO 1724 wiring connect?

It typically connects the trailer’s left and right indicators, brake lights, left and right tail lights, and rear fog lamp. Standard 7-pin wiring generally does not provide a reversing light or a permanent auxiliary 12 V supply.

Will a 7-pin wiring kit fit every car and trailer?

No. Check the vehicle make, model and year, connector type, and the trailer’s electrical requirements. A modern vehicle may require vehicle-specific wiring or a CAN-bus-compatible electronic module.

What is the difference between 7-pin ISO 1724 and 13-pin ISO 11446?

Both can support basic lighting. A 13-pin connection has additional contacts for functions such as a reversing light and auxiliary power; standard 7-pin wiring generally does not. An adapter alone cannot add circuits that are not installed.

Is ECE R55 the standard for 7-pin wiring?

No. ECE R55 concerns mechanical coupling devices and their type approval. A 7-pin trailer electrical connection typically follows ISO 1724.

How are products in this category delivered?

AUTO-HAK / Steinhof wiring kits are dispatched by courier directly from the central warehouse in Poland in 3–5 business days. Tallinn warehouse dispatch and self-pickup are not offered.

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU