Flange Towbars

Exact Vehicle Fitment (TecDoc K-type)

Select your vehicle make, model, and engine to view 100% compatible towbars and wiring kits.

Select Vehicle Model →

A flange towbar attaches to the vehicle through a bolted flange. Common patterns include two bolts at 90 mm and four bolts in an 83 × 56 mm layout, but these patterns are not interchangeable: verify fitment for the exact vehicle and towbar. This design is often chosen for commercial vans, 4×4 pickups and work trailers. The permitted trailer mass and nose load depend on the vehicle and the towbar rating—not on the bolt pattern alone. Orders are dispatched by courier from the central warehouse in Poland in 3–5 business days; self-pickup is not available.

Read Buyer's Guide & Comparison

What is a flange towbar?

A flange towbar attaches to the vehicle through a bolted flange, which accepts a compatible towball. Depending on the design, the ball may be removable or replaceable. Before ordering, check that the ball, trailer coupling and fixings are compatible, and follow the manufacturer’s installation instructions.

Common mounting patterns

  • 2 bolts, 90 mm: a two-hole flange. Check hole spacing, ball height and vehicle application.
  • 4 bolts, 83 × 56 mm: a four-hole flange. Confirm both horizontal and vertical centre-to-centre measurements.
  • These dimensions describe mounting geometry, not towing capacity. A matching bolt pattern alone does not prove that a ball or flange fits a particular towbar.

How to choose the right flange towbar

  1. Identify the exact vehicle: make, model, body style and year; check wheelbase or drivetrain where relevant.
  2. Confirm that the towbar is listed for that vehicle version. Check for configuration details such as a spare wheel, AdBlue tank or factory options.
  3. Compare the towbar’s D-value and S-value with the vehicle’s limits. The lowest applicable rating is the limit to follow.
  4. Review the installation instructions and included parts. The ball, bolts and other fixings may vary by product.
  5. Choose trailer wiring to match the trailer: 7-pin or 13-pin, with a CAN-bus-compatible module if required.

Load ratings, safety and standards

ECE R55 is the type-approval framework for mechanical coupling devices. Check the marking and documentation for the specific product; do not assume that every towbar or accessory automatically carries the same approval. The vehicle’s permitted trailer mass may be lower than the towbar rating. Never exceed the limits of the vehicle, towbar, towball or trailer. Install the towbar according to the manufacturer’s instructions and check fasteners and electrical operation after installation.

Wiring: 7-pin or 13-pin?

Feature7-pin13-pin
Typical standardISO 1724ISO 11446
Common useBasic trailer lightingLighting plus additional power circuits and functions
Reversing lightUsually not includedSeparate contact provided
Permanent or ignition-switched supplyGenerally not providedPossible with the correct additional wiring and circuit protection
A typical choice forA basic trailer without extra electrical functionsA caravan, newer trailer or equipment needing extra power

Choose the socket and wiring for the trailer’s actual functions. A 13-pin socket alone does not guarantee a permanent supply; the relevant wiring and circuit protection must also be installed. Newer vehicles may require a CAN-bus-compatible module. It interfaces with the vehicle electronics and helps control trailer lighting signals. A simple bypass relay is not suitable for every vehicle, so follow the vehicle and wiring-kit manufacturers’ instructions.

Delivery and ordering

  • Flange towbars are sent by courier directly from the central warehouse in Poland.
  • Estimated delivery is 3–5 business days.
  • Self-pickup is not available for this category.
  • Before ordering, verify vehicle fitment, load ratings and what is included in the package.

Frequently Asked Questions: Flange Towbars

What is the difference between a 2-bolt 90 mm flange and a 4-bolt 83 × 56 mm flange?

They have different hole counts and mounting dimensions, so they are not interchangeable. Even when dimensions appear to match, confirm that the towbar and ball manufacturers specify them as compatible.

Will any towball fit a flange towbar?

No. The ball must match the particular towbar flange, fasteners and manufacturer’s dimensions. Check the ball’s approval and load rating as well.

Can this towbar tow a 3,500 kg trailer?

Not necessarily. The permitted trailer mass depends on both the vehicle documents and the towbar rating. Follow the lowest applicable limit and check the D-value and S-value.

Should I choose 7-pin or 13-pin wiring?

Choose according to the trailer’s functions. A 7-pin setup often covers basic lights; a 13-pin setup provides extra circuits, including a reversing-light contact. A permanent supply requires correctly installed additional wiring.

Where does the flange towbar ship from, and how long does delivery take?

It is sent by courier from the central warehouse in Poland, with estimated delivery in 3–5 business days. Self-pickup is not available for this category.

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU