Towbars & Electrical Wiring Kits for VW VENTO (1H2) (1991–1998)
The VW VENTO (1H2) (1991–1998) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2300 kg towing capacity, S = 110 kg vertical ball load, and up to 12.3 kN D-value. Choose between fixed and detachable towballs (starting at €84.90) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
AUTO-HAK AUTO-HAK-K-06 — VW VENTO (1H2)
Fixed Swan-NeckSteinhof STEINHOF-V-050 — VW VENTO (1H2)
Detachable AutomaticTechnical Specifications & Load Capacity Table: VW VENTO (1H2)
Compare engine modifications (TecDoc K-type) and rated towing capacities for VW VENTO (1H2) (1991–1998).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| 1.4 (40kW / 55HP) [#1882] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.4 (44kW / 60HP) [#1883] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.6 (55kW / 75HP) [#1884] | 09.1992 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.6 (74kW / 101HP) [#3937] | 10.1994 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.8 (55kW / 75HP) [#1885] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.8 (66kW / 90HP) [#1886] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.9 D (48kW / 65HP) [#1879] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.9 SDI (47kW / 64HP) [#8487] | 04.1997 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.9 TD (55kW / 75HP) [#1880] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.9 TDI (66kW / 90HP) [#1881] | 09.1993 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 1.9 TDI (81kW / 110HP) [#5718] | 04.1996 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
| 2.0 (85kW / 115HP) [#1887] | 11.1991 - 09.1998 | 1900 kg | 110 kg | 12.3 kN | ~1.5 h |
7-Pin vs 13-Pin Electrical Kit Comparison for VW VENTO (1H2)
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (VW VENTO (1H2))
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for VW VENTO (1H2) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: VW VENTO (1H2) (1991–1998)
Estimated workshop installation time for the VW VENTO (1H2) is ~1.3 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: VW VENTO (1H2) Towbars
What is the maximum towing capacity and vertical load for VW VENTO (1H2) (1991–1998)?▼
Depending on the engine variant (17 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the VW VENTO (1H2) support up to 2300 kg towing capacity and S = 110 kg vertical nose weight (D-value up to 12.3 kN).
Does the VW VENTO (1H2) (1991–1998) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the VW VENTO (1H2)?▼
Most towbars for the VW VENTO (1H2) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for VW VENTO (1H2)?▼
Average workshop installation time for the VW VENTO (1H2) (1991–1998) is approximately 1.3 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).