Towbars & Electrical Wiring Kits for Seat Mii (KF1, KE1) (2011–2020)
The Seat Mii (KF1, KE1) (2011–2020) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2400 kg towing capacity, S = 120 kg vertical ball load, and up to 10.5 kN D-value. Choose between fixed and detachable towballs (starting at €96.90) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
Steinhof STEINHOF-V-160 — Seat Mii (KF1, KE1)
Detachable AutomaticSteinhof STEINHOF-V-161 — Seat Mii (KF1, KE1)
Detachable AutomaticTechnical Specifications & Load Capacity Table: Seat Mii (KF1, KE1)
Compare engine modifications (TecDoc K-type) and rated towing capacities for Seat Mii (KF1, KE1) (2011–2020).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| 1.0 (44kW / 60HP) [#15893] | 10.2011 - 07.2019 | 2300 kg | 120 kg | 10.3 kN | ~2 h |
| 1.0 (55kW / 75HP) [#15944] | 10.2011 - 07.2019 | 2300 kg | 120 kg | 10.3 kN | ~2 h |
| electric (61kW / 83HP) [#137676] | 01.2020 | 2300 kg | 120 kg | 10.3 kN | ~2 h |
7-Pin vs 13-Pin Electrical Kit Comparison for Seat Mii (KF1, KE1)
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (Seat Mii (KF1, KE1))
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for Seat Mii (KF1, KE1) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: Seat Mii (KF1, KE1) (2011–2020)
Estimated workshop installation time for the Seat Mii (KF1, KE1) is ~2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: Seat Mii (KF1, KE1) Towbars
What is the maximum towing capacity and vertical load for Seat Mii (KF1, KE1) (2011–2020)?▼
Depending on the engine variant (3 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Seat Mii (KF1, KE1) support up to 2400 kg towing capacity and S = 120 kg vertical nose weight (D-value up to 10.5 kN).
Does the Seat Mii (KF1, KE1) (2011–2020) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the Seat Mii (KF1, KE1)?▼
Most towbars for the Seat Mii (KF1, KE1) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for Seat Mii (KF1, KE1)?▼
Average workshop installation time for the Seat Mii (KF1, KE1) (2011–2020) is approximately 2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).