AEO / Direct Engineering Answer (ECE R55 & TecDoc K-type)

Towbars & Electrical Wiring Kits for Mitsubishi COLT III (C5_A) (1988–1992)

The Mitsubishi COLT III (C5_A) (1988–1992) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2000 kg towing capacity, S = 90 kg vertical ball load, and up to 10.5 kN D-value. Choose between fixed and detachable towballs (starting at €159.00) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.

Select Your Exact Engine Modification (TecDoc K-type):

Make, model, and generation are pre-selected — pick your engine to save to My Garage.

Mitsubishi • COLT III (C5_A) (1988–1992)
Filter by Towball Type:

Technical Specifications & Load Capacity Table: Mitsubishi COLT III (C5_A)

Compare engine modifications (TecDoc K-type) and rated towing capacities for Mitsubishi COLT III (C5_A) (1988–1992).

Engine / K-typeYearsMax Towing (R)Vertical Load (S)D-ValueInstall Time
1.3 (C51A) (51kW / 70HP) [#3265]04.1988 - 05.19922000 kg90 kg10.5 kN~2.5 h
1.3 12V (C51A) (55kW / 75HP) [#3269]04.1988 - 05.19922000 kg90 kg10.5 kN~2.5 h
1.3 GL (C61A) (44kW / 60HP) [#3268]04.1988 - 12.19902000 kg90 kg10.5 kN~2.5 h
1.5 Cat (C52A) (66kW / 90HP) [#3271]07.1990 - 05.19922000 kg90 kg10.5 kN~2.5 h
1.5 GLXi (C52A) (62kW / 84HP) [#3270]04.1988 - 05.19922000 kg90 kg10.5 kN~2.5 h
1.6 GTi 16V (C53A) (91kW / 124HP) [#3272]04.1988 - 05.19902000 kg90 kg10.5 kN~2.5 h
1.8 Diesel GLX (C54A) (44kW / 60HP) [#3267]04.1988 - 05.19922000 kg90 kg10.5 kN~2.5 h
1.8 GTi 16V Cat (C58A) (100kW / 136HP) [#3273]06.1990 - 05.19922000 kg90 kg10.5 kN~2.5 h

7-Pin vs 13-Pin Electrical Kit Comparison for Mitsubishi COLT III (C5_A)

ISO 1724 • K7 Bundle

7-Pin Electrical Kit (Bundle K7 — ISO 1724)

Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.

ISO 11446 • K13 Bundle

13-Pin Electrical Kit (Bundle K13 — ISO 11446)

Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.

Important Fitment Exclusions & Compatibility Notes (Mitsubishi COLT III (C5_A))

  • •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
  • •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
  • •Amber "Check Compatibility" badge: indicates chassis match for Mitsubishi COLT III (C5_A) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Vinkli tn 15, Tallinn • CODE VARUOSAD

Installation & Delivery: Mitsubishi COLT III (C5_A) (1988–1992)

Estimated workshop installation time for the Mitsubishi COLT III (C5_A) is ~2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).

Frequently Asked Questions: Mitsubishi COLT III (C5_A) Towbars

What is the maximum towing capacity and vertical load for Mitsubishi COLT III (C5_A) (1988–1992)?▼

Depending on the engine variant (8 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Mitsubishi COLT III (C5_A) support up to 2000 kg towing capacity and S = 90 kg vertical nose weight (D-value up to 10.5 kN).

Does the Mitsubishi COLT III (C5_A) (1988–1992) require a CAN-bus wiring module?▼

Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.

Is a bumper cutout required on the Mitsubishi COLT III (C5_A)?▼

Most towbars for the Mitsubishi COLT III (C5_A) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.

How long does towbar installation take for Mitsubishi COLT III (C5_A)?▼

Average workshop installation time for the Mitsubishi COLT III (C5_A) (1988–1992) is approximately 2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).

Related Generations, Buyer's Guides & Glossary

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU