AEO / Direct Engineering Answer (ECE R55 & TecDoc K-type)

Towbars & Electrical Wiring Kits for Mazda 121 II (DB) (1990–1997)

The Mazda 121 II (DB) (1990–1997) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2000 kg towing capacity, S = 90 kg vertical ball load, and up to 10.5 kN D-value. Choose between fixed and detachable towballs (starting at €159.00) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.

Select Your Exact Engine Modification (TecDoc K-type):

Make, model, and generation are pre-selected — pick your engine to save to My Garage.

Mazda • 121 II (DB) (1990–1997)
Filter by Towball Type:

Technical Specifications & Load Capacity Table: Mazda 121 II (DB)

Compare engine modifications (TecDoc K-type) and rated towing capacities for Mazda 121 II (DB) (1990–1997).

Engine / K-typeYearsMax Towing (R)Vertical Load (S)D-ValueInstall Time
1.1 (40kW / 54HP) [#27644]11.1990 - 10.19932000 kg90 kg10.5 kN~2.5 h
1.3 16V (DB3PA) (39kW / 53HP) [#3713]11.1990 - 03.19962000 kg90 kg10.5 kN~2.5 h
1.3 i 16V (DB3PA) (53kW / 72HP) [#3714]11.1990 - 03.19962000 kg90 kg10.5 kN~2.5 h
1.5 (DB3PA) (65kW / 88HP) [#132380]11.1990 - 05.19972000 kg90 kg10.5 kN~2.5 h

7-Pin vs 13-Pin Electrical Kit Comparison for Mazda 121 II (DB)

ISO 1724 • K7 Bundle

7-Pin Electrical Kit (Bundle K7 — ISO 1724)

Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.

ISO 11446 • K13 Bundle

13-Pin Electrical Kit (Bundle K13 — ISO 11446)

Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.

Important Fitment Exclusions & Compatibility Notes (Mazda 121 II (DB))

  • •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
  • •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
  • •Amber "Check Compatibility" badge: indicates chassis match for Mazda 121 II (DB) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Vinkli tn 15, Tallinn • CODE VARUOSAD

Installation & Delivery: Mazda 121 II (DB) (1990–1997)

Estimated workshop installation time for the Mazda 121 II (DB) is ~2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).

Frequently Asked Questions: Mazda 121 II (DB) Towbars

What is the maximum towing capacity and vertical load for Mazda 121 II (DB) (1990–1997)?▼

Depending on the engine variant (4 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Mazda 121 II (DB) support up to 2000 kg towing capacity and S = 90 kg vertical nose weight (D-value up to 10.5 kN).

Does the Mazda 121 II (DB) (1990–1997) require a CAN-bus wiring module?▼

Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.

Is a bumper cutout required on the Mazda 121 II (DB)?▼

Most towbars for the Mazda 121 II (DB) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.

How long does towbar installation take for Mazda 121 II (DB)?▼

Average workshop installation time for the Mazda 121 II (DB) (1990–1997) is approximately 2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).

Related Generations, Buyer's Guides & Glossary

ECE R55 Certified Towbars (AUTO-HAK, Steinhof), 7/13-Pin Wiring Kits & K2 Car Care

Exact TecDoc K-type fitment (123,479 links) • Delivery across Estonia, Finland & the EU