Towbars & Electrical Wiring Kits for Honda CR-V I (RD) (1995–2002)
The Honda CR-V I (RD) (1995–2002) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2000 kg towing capacity, S = 90 kg vertical ball load, and up to 10.5 kN D-value. Choose between fixed and detachable towballs (starting at €159.00) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
Technical Specifications & Load Capacity Table: Honda CR-V I (RD)
Compare engine modifications (TecDoc K-type) and rated towing capacities for Honda CR-V I (RD) (1995–2002).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| 2.0 (RD1) (98kW / 133HP) [#20539] | 04.1999 - 02.2002 | 2000 kg | 90 kg | 10.5 kN | ~2.5 h |
| 2.0 16V 4WD (RD1, RD3) (94kW / 128HP) [#8366] | 10.1995 - 12.2001 | 2000 kg | 90 kg | 10.5 kN | ~2.5 h |
| 2.0 16V 4WD (RD1, RD3) (108kW / 147HP) [#13180] | 01.1999 - 02.2002 | 2000 kg | 90 kg | 10.5 kN | ~2.5 h |
| 2.0 4WD (RD1) (109kW / 148HP) [#44303] | 09.1998 - 12.2001 | 2000 kg | 90 kg | 10.5 kN | ~2.5 h |
7-Pin vs 13-Pin Electrical Kit Comparison for Honda CR-V I (RD)
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (Honda CR-V I (RD))
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for Honda CR-V I (RD) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: Honda CR-V I (RD) (1995–2002)
Estimated workshop installation time for the Honda CR-V I (RD) is ~2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: Honda CR-V I (RD) Towbars
What is the maximum towing capacity and vertical load for Honda CR-V I (RD) (1995–2002)?▼
Depending on the engine variant (4 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Honda CR-V I (RD) support up to 2000 kg towing capacity and S = 90 kg vertical nose weight (D-value up to 10.5 kN).
Does the Honda CR-V I (RD) (1995–2002) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the Honda CR-V I (RD)?▼
Most towbars for the Honda CR-V I (RD) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for Honda CR-V I (RD)?▼
Average workshop installation time for the Honda CR-V I (RD) (1995–2002) is approximately 2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).