Towbars & Electrical Wiring Kits for Ford Explorer Face lift (2016–2019)
The Ford Explorer Face lift (2016–2019) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2300 kg towing capacity, S = 110 kg vertical ball load, and up to 11.5 kN D-value. Choose between fixed and detachable towballs (starting at €130.90) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
Steinhof STEINHOF-F-277 — Ford Explorer Face lift
Detachable AutomaticSteinhof STEINHOF-F-278 — Ford Explorer Face lift
Vertically Detachable (Invisible)Technical Specifications & Load Capacity Table: Ford Explorer Face lift
Compare engine modifications (TecDoc K-type) and rated towing capacities for Ford Explorer Face lift (2016–2019).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| Explorer (All engines / kõik mootorid) (-) [#9900055] | 2016 - 2019 | 2200 kg | 100 kg | 11.4 kN | ~2 h |
7-Pin vs 13-Pin Electrical Kit Comparison for Ford Explorer Face lift
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (Ford Explorer Face lift)
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for Ford Explorer Face lift where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: Ford Explorer Face lift (2016–2019)
Estimated workshop installation time for the Ford Explorer Face lift is ~2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: Ford Explorer Face lift Towbars
What is the maximum towing capacity and vertical load for Ford Explorer Face lift (2016–2019)?▼
Depending on the engine variant (1 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Ford Explorer Face lift support up to 2300 kg towing capacity and S = 110 kg vertical nose weight (D-value up to 11.5 kN).
Does the Ford Explorer Face lift (2016–2019) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the Ford Explorer Face lift?▼
Most towbars for the Ford Explorer Face lift install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for Ford Explorer Face lift?▼
Average workshop installation time for the Ford Explorer Face lift (2016–2019) is approximately 2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).