Towbars & Electrical Wiring Kits for Citroën JUMPER I Bus (230P) (1994–2002)
The Citroën JUMPER I Bus (230P) (1994–2002) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2400 kg towing capacity, S = 120 kg vertical ball load, and up to 11.6 kN D-value. Choose between fixed and detachable towballs (starting at €171.90) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
Steinhof STEINHOF-F-062 — Citroën JUMPER I Bus (230P)
Detachable AutomaticTechnical Specifications & Load Capacity Table: Citroën JUMPER I Bus (230P)
Compare engine modifications (TecDoc K-type) and rated towing capacities for Citroën JUMPER I Bus (230P) (1994–2002).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| 1.9 D (51kW / 69HP) [#13188] | 01.1999 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 1.9 TD (66kW / 90HP) [#4052] | 08.1994 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 1.9 TD (68kW / 92HP) [#4035] | 02.1994 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 1.9 TD 4x4 (68kW / 92HP) [#7380] | 08.1996 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.0 (80kW / 109HP) [#4037] | 02.1994 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.0 4x4 (80kW / 109HP) [#7382] | 08.1996 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 D (63kW / 86HP) [#4053] | 08.1994 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 D 4x4 (63kW / 86HP) [#7379] | 08.1996 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 TD (76kW / 103HP) [#4036] | 08.1994 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 TD 4x4 (76kW / 103HP) [#7381] | 08.1996 - 04.2002 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 TDI 4x4 (79kW / 107HP) [#7756] | 12.1996 - 11.2000 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
| 2.5 TDi (79kW / 107HP) [#7755] | 12.1996 - 11.2000 | 2400 kg | 120 kg | 11.6 kN | ~2.5 h |
7-Pin vs 13-Pin Electrical Kit Comparison for Citroën JUMPER I Bus (230P)
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (Citroën JUMPER I Bus (230P))
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for Citroën JUMPER I Bus (230P) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: Citroën JUMPER I Bus (230P) (1994–2002)
Estimated workshop installation time for the Citroën JUMPER I Bus (230P) is ~2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: Citroën JUMPER I Bus (230P) Towbars
What is the maximum towing capacity and vertical load for Citroën JUMPER I Bus (230P) (1994–2002)?▼
Depending on the engine variant (15 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Citroën JUMPER I Bus (230P) support up to 2400 kg towing capacity and S = 120 kg vertical nose weight (D-value up to 11.6 kN).
Does the Citroën JUMPER I Bus (230P) (1994–2002) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the Citroën JUMPER I Bus (230P)?▼
Most towbars for the Citroën JUMPER I Bus (230P) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for Citroën JUMPER I Bus (230P)?▼
Average workshop installation time for the Citroën JUMPER I Bus (230P) (1994–2002) is approximately 2.5 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).