Towbars & Electrical Wiring Kits for Audi E-TRON (GEN) (2018–2023)
The Audi E-TRON (GEN) (2018–2023) is compatible with ECE R55 (E20) homologated AUTO-HAK and Steinhof towbars rated up to 2400 kg towing capacity, S = 120 kg vertical ball load, and up to 10.5 kN D-value. Choose between fixed and detachable towballs (starting at €125.90) bundled with 7-pin (K7) or 13-pin (K13) wiring harnesses.
Select Your Exact Engine Modification (TecDoc K-type):
Make, model, and generation are pre-selected — pick your engine to save to My Garage.
Steinhof STEINHOF-A-119 — Audi E-TRON (GEN)
Detachable AutomaticSteinhof STEINHOF-A-120 — Audi E-TRON (GEN)
Vertically Detachable (Invisible)AUTO-HAK AUTO-HAK-A-41V — Audi E-TRON (GEN)
Vertically Detachable (Invisible)Technical Specifications & Load Capacity Table: Audi E-TRON (GEN)
Compare engine modifications (TecDoc K-type) and rated towing capacities for Audi E-TRON (GEN) (2018–2023).
| Engine / K-type | Years | Max Towing (R) | Vertical Load (S) | D-Value | Install Time |
|---|---|---|---|---|---|
| 50 quattro (230kW / 313HP) [#138779] | 09.2019 - 07.2023 | 2400 kg | 100 kg | 10.4 kN | ~2 h |
| 55 quattro (300kW / 408HP) [#134328] | 09.2018 - 07.2023 | 2400 kg | 100 kg | 10.4 kN | ~2 h |
| S quattro (370kW / 503HP) [#141871] | 09.2020 - 07.2023 | 2400 kg | 100 kg | 10.4 kN | ~2 h |
7-Pin vs 13-Pin Electrical Kit Comparison for Audi E-TRON (GEN)
7-Pin Electrical Kit (Bundle K7 — ISO 1724)
Designed for standard utility trailers up to 750 kg. Powers indicators, tail lights, brake lights, and rear fog light. Vehicles with bulb monitoring require a CAN-bus / Smart-Connect relay module.
13-Pin Electrical Kit (Bundle K13 — ISO 11446)
Recommended for Thule towball bike carriers, caravans, and braked trailers. Includes dedicated reverse light circuit (Pin 8) and 12V power supply. Easily adapts to 7-pin trailers with a compact 13→7 adapter.
Important Fitment Exclusions & Compatibility Notes (Audi E-TRON (GEN))
- •Sport trim levels & aerodynamic bumpers (R-Line, GTI, S-Line, RS, AMG, M-Sport): verify lower rear diffuser clearance before ordering.
- •Diesel models with AdBlue (SCR) tanks and Plug-in Hybrid (PHEV/GTE) versions: always select your exact engine K-type in the selector bar above.
- •Amber "Check Compatibility" badge: indicates chassis match for Audi E-TRON (GEN) where drivetrain (2WD vs AWD) or spare wheel well configuration should be verified.
Installation & Delivery: Audi E-TRON (GEN) (2018–2023)
Estimated workshop installation time for the Audi E-TRON (GEN) is ~2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).
Frequently Asked Questions: Audi E-TRON (GEN) Towbars
What is the maximum towing capacity and vertical load for Audi E-TRON (GEN) (2018–2023)?▼
Depending on the engine variant (3 K-type engines supported), ECE R55 approved AUTO-HAK and Steinhof towbars for the Audi E-TRON (GEN) support up to 2400 kg towing capacity and S = 120 kg vertical nose weight (D-value up to 10.5 kN).
Does the Audi E-TRON (GEN) (2018–2023) require a CAN-bus wiring module?▼
Yes, vehicles equipped with bulb failure monitoring (Check-Control), LED tail lights, or factory parking sensors (PDC) require a 7-pin (K7) or 13-pin (K13) wiring kit with an electronic CAN-bus / Smart-Connect control module.
Is a bumper cutout required on the Audi E-TRON (GEN)?▼
Most towbars for the Audi E-TRON (GEN) install with either no bumper cutout or a small invisible trim on the underside of the rear valence. Exact cutout details are listed on each product card below.
How long does towbar installation take for Audi E-TRON (GEN)?▼
Average workshop installation time for the Audi E-TRON (GEN) (2018–2023) is approximately 2.0 hours. We ship towbars directly via DPD courier to your home or chosen workshop (no warehouse pickup).