1. Why EVs and Hybrids Differ From Petrol Counterparts
Two cars with identical bodywork—such as a VW Passat TDI vs Passat GTE PHEV—often route high-voltage harnesses or battery coolers directly behind the rear bumper. Always filter by exact engine/battery variant via our TecDoc K-type selector.
| Vehicle Category | Key Fitment Check | Recommended Setup |
|---|---|---|
| Towing-Rated EV (BEV) | High curb weight (T) increases required D-value | Vertical detachable towbar (V) + 13-pin CAN-bus |
| Bike-Rack-Only EV (0 kg O.1/O.2) | Towing prohibited, vertical S-load (50–75 kg) permitted | Carrier-specific hitch beam |
| Plug-In Hybrid (PHEV) | Under-boot battery & exhaust clearance varies | Verify exact PHEV/Hybrid trim in K-type |
| Caravan Tow Car | Higher vertical load (S = 75–100+ kg) + +12V fridge | High-D beam + 13-pin pins 9 & 10 + clean dry ball |
2. Protecting EV 12V Architecture
EVs monitor auxiliary 12V draw strictly via DC-DC converters and sleep-mode wake circuits. Never splice wires directly—always install a certified CAN-bus smart bypass kit or OEM Plug-and-Play loom. Remember that towing tall trailers reduces EV range by roughly 30–55% due to aerodynamic drag.
3. Caravan Hitching Rules
- Pins 9 & 10 (+12V & Split-Charge): Standard 13-pin looms cover all road lights (Pins 1–8). If you run a 3-way absorption fridge or leisure battery while driving, confirm your 13-pin kit includes or supports the Pin 9/10 permanent power extension.
- Dry Ball Only for Friction Stabilizers: AL-KO / Winterhoff caravan hitches clamp friction pads around the 50 mm sphere. Sand off glossy paint on a brand-new neck and degrease with K2 Brake Cleaner—never apply grease.